SSPCStandards
SSPC-AB 1 -Mineral and Slag Abrasives
SSPC-AB 2 - Cleanliness of Recycled Ferrous Metallic Abrasives
SSPC-AB 3 - Newly Manufactured or Re-Manufactured Steel Abrasives
SSPC-CS 23.00(I) - Interim Specification for the Application of Thermal SprayCoatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites forthe Corrosion Protection of Steel
SSPC-Guide 10 - Guide to Specifying Coatings Conforming to Volatile OrganicCompound (VOC) Content Requirements
SSPC-Guide 11 - Guide for Coating Concrete
SSPC-Guide 12 - Guide for Illumination of Industrial Painting Projects
SSPC-Guide 13 - Guide for the Identification and Use of Industrial CoatingMaterial in Computerized Product Databases
SSPC-Guide 14 - Guide for the Repair of Imperfections in Galvanized orInorganic Zinc Coated Steel Using Organic Zinc-Rich Coating
SSPC-Guide 6 - Guide for Containing Debris Generated During Paint RemovalOperations
SSPC-Guide 7 - Guide for the Disposal of Lead-Contaminated Surface PreparationDebris
SSPC-Guide 9 - Guide for Atmospheric Testing of Coatings in the Field
SSPC-ME 1 - Uncontaminated Rusted Steel
SSPC-PA 1 - Shop, Field, and Maintenance Painting of Steel
SSPC-PA 2 - Measurement of Dry Coating Thickness With Magnetic Gages
SSPC-PA COM - Commentary on Paint Application
SSPC-PA Guide 3 - A Guide to Safety in Paint Application
SSPC-PA Guide 4 - Guide to Maintenance Repainting with Oil Base or AlkydPainting Systems
SSPC-PA Guide 5 - Guide to Maintenance Painting Programs
SSPC-Paint 101 - Aluminum Alkyd Paint (Type I, Leafing and Type II,Non-Leafing)
SSPC-Paint 102 - Black Alkyd Paint
SSPC-Paint 103 - Black Phenolic Paint
SSPC-Paint 104 - White or Tinted Alkyd Paint
SSPC-Paint 106 - Black Vinyl Paint
SSPC-Paint 108 - High-Build Thixotropic Leafing Aluminum Paint
SSPC-Paint 11 - Red Iron Oxide, Zinc Chromate, Raw Linseed Oil, and AlkydPrimer
SSPC-Paint 12 - Cold-Applied Asphalt Mastic (Extra Thick Film)
SSPC-Paint 15 - Steel Joist Shop Primer
SSPC-Paint 16 - Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint
SSPC-Paint 17 - Chlorinated Rubber Inhibitive Primer
SSPC-Paint 18 - Chlorinated Rubber Intermediate Coat Paint
SSPC-Paint 19 - Chlorinated Rubber Topcoat Paint
SSPC-Paint 20 - Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic)
SSPC-Paint 21 - White or Colored Silicone Alkyd Paint
SSPC-Paint 22 - Epoxy-Polyamide Paints (Primer, Intermediate, and Topcoat)
SSPC-Paint 23 - Latex Primer for Steel Surfaces
SSPC-Paint 24 - Latex Semi-gloss Exterior Topcoat
SSPC-Paint 25 - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand CleanedSteel, Type I and Type II
SSPC-Paint 25.1BCS - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over BlastCleaned Steel
SSPC-Paint 26 - Slow Drying Linseed Oil Black Maintenance Primer, (Without Leadand Chromate Pigment)
SSPC-Paint 27 - Basic Zinc Chromate-Vinyl Butyral Wash Primer
SSPC-Paint 28 - Water-Borne Epoxy Primer for Steel Surfaces
SSPC-Paint 29 - Zinc Dust Sacrificial Primer, Performance-Based
SSPC-Paint 30 - Weld-Through Inorganic Zinc Primer
SSPC-Paint 31 - Single-Package Waterborne Alkyd Primer for Steel Surfaces,Performance-Based
SSPC-Paint 32 - Coal Tar Emulsion Coating
SSPC-Paint 33 - Coal Tar Mastic, Cold Applied
SSPC-Paint 34 - Water-Borne Epoxy Topcoat for Steel Surfaces
SSPC-Paint 35 - Medium Oil Alkyd Primer (Air Dry/Low Bake), Type I and Type II
SSPC-Paint 36 - Two-Component Weatherable Aliphatic Polyurethane Topcoat,Performance-Based
SSPC-Paint 5 - Zinc Dust, Zinc Oxide, and Phenolic Varnish Paint
SSPC-Paint 8 - Aluminum Vinyl Paint
SSPC-Paint 9 - White (or Colored) Vinyl Paint
SSPC-Paint COM - Commentary on Paint Specifications
SSPC-PS 1.09 - Three-Coat Oil Base Zinc Oxide Painting System (Without Lead orChromate Pigment)
SSPC-PS 1.10 - Four-Coat Oil Base Zinc Oxide Painting System (Without Lead orChromate Pigment)
SSPC-PS 1.12 - Three-Coat Oil Base Zinc Chromate Painting System
SSPC-PS 1.13 - One-Coat Oil Base Slow Drying Maintenance Painting System(Without Lead or Chromate Pigments)
SSPC-PS 10.01 - Hot-Applied Coal Tar Enamel Painting System
SSPC-PS 10.02 - Cold-Applied Coal Tar Mastic Painting System
SSPC-PS 11.01 - Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System
SSPC-PS 12.01 - One-Coat Zinc-Rich Painting System
SSPC-PS 13.01 - Epoxy Polyamide Painting System
SSPC-PS 14.01 - Steel Joist Shop Painting System
SSPC-PS 15.01 - Chlorinated Rubber Painting System for Salt Water Immersion
SSPC-PS 15.02 - Chlorinated Rubber Painting System for Fresh Water Immersion
SSPC-PS 15.03 - Chlorinated Rubber Painting System for Marine and IndustrialEnvironments
SSPC-PS 15.04 - Chlorinated Rubber Painting System for Field Application Over aShop-Applied Solvent Base Inorganic Zinc-Rich Primer
SSPC-PS 16.01 - Silicone Alkyd Painting System for New Steel
SSPC-PS 18.01 - Three-Coat Latex Painting System
SSPC-PS 24.00 - Latex Painting System for Industrial and Marine Atmospheres,Performance-Based
SSPC-PS 26.00 - Aluminum Pigmented Epoxy Coating System MaterialsSpecification, Performance-Based Type I, for Use over Blast Cleaned Steel TypeII, for Use over Hand Cleaned Steel
SSPC-PS 27.00 - Alkyd Coating System Materials Specification, Performance-Based
SSPC-PS 4.02 - Four-Coat Vinyl Painting System (For Fresh Water, Chemical, andCorrosive Atmospheres)
SSPC-PS 4.04 - Four-Coat White or Colored Vinyl Painting System (For FreshWater, Chemical, and Corrosive Atmospheres)
SSPC-PS 9.01 - Cold-Applied Asphalt Mastic Painting System with Extra-ThickFilm
SSPC-PS COM - Commentary on Painting Systems
SSPC-PS Guide 1.00 - Guide for Selecting Oil Base Painting Systems
SSPC-PS Guide 12.00 - Guide to Selecting Zinc-Rich Coating Systems
SSPC-PS Guide 15.00 - Guide for Selecting Chlorinated Rubber Painting Systems
SSPC-PS Guide 17.00 - Guide for Selecting Urethane Painting Systems
SSPC-PS Guide 19.00 - Guide for Selecting Painting Systems for Ship Bottoms
SSPC-PS Guide 2.00 - Guide for Selecting Alkyd Painting Systems
SSPC-PS Guide 20.00 - Guide for Selecting Painting Systems for Boot-toppings
SSPC-PS Guide 21.00 - Guide for Selecting Painting Systems for Topsides
SSPC-PS Guide 22.00 - Guide for Selecting One-Coat Preconstruction orPrefabrication Painting Systems
SSPC-PS Guide 3.00 - Guide for Selecting Phenolic Painting Systems
SSPC-PS Guide 4.00 - Guide for Selecting Vinyl Painting Systems
SSPC-PS Guide 7.00 - Guide for Selecting One-Coat Shop Painting Systems
SSPC-PS Guide 8.00 - Guide to Top-coating Zinc-Rich Primers
SSPC-QP 1 - Standard Procedure for Evaluating Painting Contractors (FieldApplication to Complex Industrial Structures)
SSPC-QP 2 - Standard Procedure for the Qualification of Painting Contractors(Field Removal of Hazardous Coatings from Complex Structures)
SSPC-QP 3 - Standard Procedure for Evaluating Qualifications of Shop PaintingApplicators
SSPC-QP 4 - Standard Procedure for Evaluating the Qualifications of ContractorsDisturbing Hazardous Coatings During Demolition and Repair Work
SSPC-QP 5 - Standard Procedure for Evaluating Qualifications of Coating andLining Inspection Companies
SSPC-QP COM - Commentary on Qualification Procedures
SSPC-SP 1 - Solvent Cleaning
SSPC-SP 10/NACE No. 2 - Near-White Blast Cleaning
SSPC-SP 11 - Power Tool Cleaning to Bare Metal
SSPC-SP 12/NACE No. 5 - Surface Preparation and Cleaning of Steel and OtherHard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating
SSPC-SP 13/NACE No. 6 - Surface Preparation of Concrete
SSPC-SP 14/NACE No. 8 - Industrial Blast Cleaning
SSPC-SP 2 - Hand Tool Cleaning
SSPC-SP 3 - Power Tool Cleaning
SSPC-SP 5/NACE No. 1 - White Metal Blast Cleaning
SSPC-SP 6/NACE No. 3 - Commercial Blast Cleaning
SSPC-SP 7/NACE No. 4 - Brush-Off Blast Cleaning
SSPC-SP 8 - Pickling
SSPC-SP COM - Surface Preparation Commentary for Steel and Concrete Substrates
SSPC-TR 1/NACE 6G194 - Thermal Pre-Cleaning
SSPC-TR 2/NACE 6G198 - Wet Abrasive Blast Cleaning
SSPC-TU 1 - Surface-Tolerant Coatings for Steel
SSPC-TU 2/NACE 6G197 - Design, Installation, and Maintenance of Coating Systemsfor Concrete Used in Secondary Containment
SSPC-TU 3 - Over-coating
SSPC-TU 4 - Field Methods for Retrieval and Analysis of Soluble Salts onSubstrates
SSPC-TU 5 - Accelerated Testing of Industrial Protective Coatings
SSPC-TU 6 - Chemical Stripping of Organic Coatings From Steel Structures
SSPC-TU 7 - Conducting Ambient Air, Soil, and Water Sampling During SurfacePreparation and Paint Disturbance Activities
SSPC-VIS 1-89 - Visual Standard for Abrasive Blast Cleaned Steel
SSPC-VIS 2 - Standard Method for Evaluating Degree of Rusting on Painted SteelSurfaces
SSPC-VIS 3 - Visual Standard for Power- and Hand-Tool Cleaned Steel
SSPC-VIS 4(I)/NACE No. 7 - Interim Guide and Visual Reference Photographs forSteel Cleaned by Water-jetting
SSPC标准索引
CHAPTER1——如何使用SSPC的标准、规范和指导
CHAPTER 2——表面处理标准、指导和规范
SSPC-SP COM
钢结构和混凝土基材表面处理的注译
Guide to SSPC-VIS 1
钢结构表面干喷砂处理指导和照片参考
Guide to SSPC-VIS 2
已涂装油漆的钢结构表面生锈等级的评估标准方法
Guide to SSPC-VIS 3
钢结构表面电动和手工喷砂处理的指导和照片参考
Guide to SSPC-VIS 4/NACE VIS-7
钢结构表面水喷射处理的指导和照片参考
Guide to SSPC-VIS 5/NACE VIS-9
钢结构表面湿喷砂处理指导和照片参考
SSPC-SP1
溶剂清理
SSPC-SP2
手工清理
SSPC-SP3
机械清理
SSPC-SP5/NACE No.1
白合金喷砂清理
SSPC-SP 6/NACE No.3
大规模喷砂清理（3级金属表面喷砂清理）
SSPC-SP7/NACE No.4
清扫级喷砂清理
SSPC-SP8
酸洗
SSPC-SP 10/NACE No.2
近喷砂除锈级清理
SSPC-SP 11
裸露金属表面的机械清理
SSPC-SP 12/NACE No.5
重涂之前金属表面水喷射处理和清洗
SSPC-SP 13/NACE No.6
混凝土表面处理
SSPC-SP 14/NACE No.8
工业化喷砂清理
SSPC-SP 15
商业动力设备清理
CHAPTER 3——SSPC/NACE共同技术报告
SSPC-TR 1/NACE 6G194
热处理
SSPC-TR 2/NACE 6G198
湿喷砂
SSPC-TR 3/NACE 6A192
钢结构罐体、管道和其他封闭环境在表面预处理、喷涂和固化保养过程中的除湿和温度控制
SSPC-TR 4/NACE 80200
大气环境下工业漆预备规范
SSPC-TR 5/ICRI 03741/NACE 02203
混凝土防腐配套体系的设计、实施和保养
CHAPTER 4——研磨剂规范
SSPC-AB 1
矿石和矿渣磨料
SSPC-AB 2
清洁的回收铁质磨料
SSPC-AB 3
铁质磨料
CHAPTER 5——油漆和涂料体系的指导和规范
SSPC-PS COM
油漆配套体系的注译
SSPC-PS Guide 1.00
选用溶剂型油漆配套体系的指导
SSPC-PS 1.09
三层溶剂型氧化锌油漆配套体系（无铅盐或铬盐颜料）
SSPC-PS 1.10
四层溶剂型氧化锌油漆配套体系（无铅盐或铬盐颜料）
SSPC-PS 1.13
单层溶剂型慢干保养漆配套（无铅盐或铬盐颜料）
SSPC-PS Guide 2.00
选用醇酸类油漆配套体系的指导
SSPC-PS Guide 4.00
选用乙烯基类油漆配套体系的指导
SSPC-PS 4.02
四层乙烯基类油漆配套体系
SSPC-PS 4.04
四层纯白或各色乙烯基类油漆配套体系（适用淡水、化工和腐蚀环境）
SSPC-PS Guide 7.00
选用单层车间底漆配套的指导
SSPC-PS Guide 8.00
单层富锌底漆配套体系指导
SSPC-PS 9.01
超厚浆型室温施工沥青厚浆型油漆体系
SSPC-PS 10.01
热喷涂煤焦沥青油漆配套体系
SSPC-PS 10.02
室温喷涂煤焦沥青油漆配套体系
SSPC-PS 11.01
黑色（或铁红色）环氧聚酰胺煤焦沥青油漆配套体系
SSPC-PS Guide 12.00
富锌油漆配套体系的指导
SSPC-PS 12.01
单层富锌油漆体系
SSPC-PS 13.01
环氧聚酰胺油漆配套体系
SSPC-PS 14.01
钢箱梁车间底漆配套体系
SSPC-PS Guide 15.00
选用氯化橡胶油漆配套体系的指导
SSPC-PS 15.01
氯化橡胶配套体系的耐盐水浸泡
SSPC-PS 15.02
氯化橡胶配套体系的耐淡水浸泡
SSPC-PS 15.03
海洋性和工业环境下的氯化橡胶配套体系
SSPC-PS 15.04
现场涂装在溶剂型无机富锌底漆上的氯化橡胶配套体系
SSPC-PS 16.01
新钢材上有机硅改性醇酸油漆配套体系
SSPC-PS Guide 17.00
选择氨基甲酸酯油漆配套体系的指导
SSPC-PS 18.01
三层乳胶漆配套体系
SSPC-PS Guide 19.00
船底部位油漆配套体系的选用指导
SSPC-PS Guide 20.00
水线部位油漆配套体系的选用指导
SSPC-PS Guide 21.00
干舷部位油漆配套体系的选用指导
SSPC-PS Guide 22.00
施工前或预涂装单层油漆的选用指导
SSPC-PS 23.00/AWS C2.23M/NACE No.12
用于钢结构防腐的热喷铝、锌以及合金和混合物施工规范
SSPC-PS 24.00
用于工业性和海洋性大气环境下高性能的乳胶漆配套体系
SSPC-PS 26.00
高性能的环氧铝粉涂料配套体系的材料规范
SSPC-PS 27.00
高性能的醇酸涂料配套体系材料规范
CHAPTER 6——油漆和涂料的标准和规范
SSPC-Paint COM
油漆规范注译
SSPC-Paint 8
乙烯基铝粉漆
SSPC-Paint 9
纯白（或各色）乙烯基漆
SSPC-Paint 15
钢箱梁车间底漆/金属结构底漆
SSPC-Paint 16
黑（或铁红）色环氧聚酰胺煤焦沥青漆
SSPC-Paint 17
氯化橡胶防锈底漆
SSPC-Paint 18
氯化橡胶中间漆
SSPC-Paint 19
氯化橡胶面漆
SSPC-Paint 20
富锌漆（I－有机型，II－无机型）
SSPC-Paint 21
纯白（或各色）有机硅改性醇酸漆
SSPC-Paint 22
环氧聚酰胺漆（底漆、中间漆和面漆）
SSPC-Paint 23
钢结构乳胶漆
SSPC-Paint 24
半光外墙乳胶面漆
SSPC-Paint 25
用于手工处理钢结构的氧化锌，醇酸，亚麻油底漆
SSPC-Paint 25 BCS
用于喷砂处理钢结构的氧化锌，醇酸，亚麻油底漆
SSPC-Paint 26
黑色慢干亚麻油保养底漆（无铅盐和铬盐颜料）
SSPC-Paint 27
铬酸锌聚乙烯醇缩丁醛磷化底漆
SSPC-Paint 28
钢结构水性环氧底漆
SSPC-Paint 29
高性能锌粉阴级保护底漆
SSPC-Paint 30
无机富锌可焊接底漆
SSPC-Paint 31
单组分高性能型水性醇酸底漆
SSPC-Paint 32
煤焦油乳胶漆
SSPC-Paint 33
室温厚浆型煤焦油漆
SSPC-Paint 34
钢结构水性环氧面漆
SSPC-Paint 35
中油度醇酸底漆（气干/低温烘烤）
SSPC-Paint 36
双组分高性能耐候脂肪族聚氨酯面漆
SSPC-Paint 37
高性能用于胶结性材料上的水性环氧漆
SSPC-Paint 38
高性能单组分湿固化耐候型脂肪族聚氨酯面漆
SSPC-Paint 39
高性能快干或中等干燥双组分脂肪族聚氨酯面漆
SSPC-Paint 101
铝粉醇酸漆
SSPC-Paint 102
黑色醇酸漆
SSPC-Paint 104
白色或各色醇酸漆
SSPC-Paint 106
黑色乙烯基漆
SSPC-Paint 108
高触变厚浆型浮型铝粉漆
CHAPTER 7——油漆施工标准、指导、和规范
SSPC-PA 1
钢结构车间底漆、现场涂装和维护
SSPC-PA 2
用磁力仪测量干膜厚度
SSPC-PA 3 Guide 3
SSPC-PA 3 Guide 4
油性或醇酸漆维修复涂指导方针
SSPC-PA 3 Guide 5
大气环境下钢结构维护涂装的指导方针
SSPC-PA 6/NACE No. 10
室外碳钢储罐内涂使用玻璃纤维增强材料
SSPC-PA 7
混凝土上使用薄型涂料
SSPC-PA 8/NACE No.11
新造碳钢工艺结构上使用薄型有机内涂
CHAPTER 8——质量程序
SSPC-QP COM
质量控制程序注译
SSPC-QP 1
油漆施工方评估标准程序（现场复杂工业结构施工）
SSPC-QP 2
油漆施工方相关资质的标准程序（现场从复杂结构中移除危险性涂料）
SSPC-QP 3
车间底漆施工的质量评估的标准程序
SSPC-QP 4
油漆施工方在清洗和维修的工作中防止油漆发生危险的评估标准程序
SSPC-QP 5
检验部门评估油漆和内涂施工质量的标准程序
SSPC-QP 6
对钢结构和混凝土结构进行防腐热喷涂施工质量的标准程序
SSPC-QP 7
评估有限工业工作经验的油漆施工方的程序
SSPC-QP 8
评估小型资质公司在混凝土和其他胶结性材料涂装的油漆和铺面的标准程序
SSPC-QS 1
评估施工方高质量管理系统的标准程序
CHAPTER9——技术指导
SSPC-Guide 6
在脱漆操作过程中保留部分旧漆膜的指导方针
SSPC- Guide 7
表面处理中处置受铅污染漆膜的指导方针
SSPC- Guide 9
现场涂装时环境测试的指导方针
SSPC- Guide 10
对指定使用油漆测试有机挥发份（VOC）的指导方针
SSPC- Guide 12
阐明工程使用工业漆的的指导方针
SSPC- Guide 13
通过自动化产品库确认和使用工业漆的指导方针
SSPC- Guide 14
使用有机富锌油漆对已经涂覆电镀锌、有机富锌或无机富锌的钢表面缺陷进行修补的直到方针
SSPC- Guide 16
指定和选择铁锈收集器的指导方针
SSPC- Guide 17
为工业漆和油漆施工方开发社会安全程序的指导方针
CHAPTER10——技术更新
SSPC- TU 1
使用在钢结构上的表面容忍涂料
SSPC- TU 2/NACE 6G197
使用在混凝土上二次防护的油漆体系的设计、施工和维护
SSPC- TU 3
罩光涂层
SSPC- TU 4
现场分析和去除材质表面可溶性盐的方法
SSPC-TU 5
工业防护漆的加速测试法
SSPC-TU 6
从钢结构表面化学剥落的有机涂层
SSPC-TU 7
在表面预处理和油漆搅拌的过程中对周围空气、土壤和水的取样
SSPC-TU 8
使用含有异氰酸根的油漆，例如工业保养漆
SSPC-TU 9
评估工程中使用防腐涂料的成本
SSPC-TU 10
在混凝土基座上使用厚膜型涂料和铺面
CHAPTER11——测试样板的预备方法
SSPC-ME 1
未污染的生锈钢铁
附录
附录 A
参考标准和规范
附录 B
参考组织
附录 C
废弃规范
2005版的补充
SSPC- Guide 15
现场对钢结构和其他无孔材质表面分析和去除可溶性盐的方法
